Pedestal Table: Beginning the Finish

Over the weekend I got started on the finish for the pedestal table I've been working on. The clients and I decided on a light honey color for the piece. At the point pictured, the table has been wash coated with a 1-lb cut of shellac, stained (with a water-based aniline dye), and topcoated with a few additional wash coats of shellac. I expect to build up enough shellac on the base today so that I can rub and wax it tomorrow. The top will be receiving a few coats of Minwax's Antique Oil, which I think creates a wonderful, tough, low-luster finish.

Breakfront Base Complete!

Yesterday afternoon I finished the chinese chippendale breakfront base I've been working on. If you've not been following these posts, please note that I'm not responsible for the upper section of this piece; I only made the base to match.



Finishing took the better part of last week. After prep was complete, I used a water-based aniline dye to match the background color of the existing piece. A thin wash coat of shellac followed, and then grain filler tinted with japan color. After the next coat of shellac, I applied walnut crystals and a different aniline dye to approximate the color variations in the upper piece. Once this was done to my satisfaction, a few more coats of shellac were brushed on. Finally, I rubbed-out with steel wool, then waxed and buffed.

Thanks to Alan and Harold for their extensive help with this finish!



The client hasn't chosen hardware yet, if you're wondering how one opens the doors and drawers.